| Paper ID
(Click to download) |
Paper -Title | Author(s) |
| 3 | NUMERICAL ANALYSIS TO IMPROVE THE POWER CONVERSION EFFICIENCY OF PEROVSKITE-CDTE TANDEM SOLAR CELL | Sharmin Jahan, Rudaina Tasnuva and M.A. Matin |
| 4 | INTRODUCING MAXIMUM RENEWABLE ENERGY POTENTIAL AND ITS IMPACT ON BANGLADESH ENERGY SECTOR | Samira Kalam and Dr. Md. Tazul Islam |
| 7 | COMPARATIVE ANALYSIS OF SAFETY SYSTEMS AND SEVERE ACCIDENT PROGRESSION FOR VVER-1200 AND AP-1000 FOLLOWING LOCA IN HOTLEG BY PCTRAN | Sushmita Barua, Monika Tabassum, Md. Sadman Anjum Joarder, Md Ghulam Zakir, Md. Abdur Razzak and Md. Azizur Rahman |
| 9 | COMBUSTION CHARACTERISTICS OF A NATURAL GAS-DIESEL DUAL-FUEL ENGINE-A NUMERICAL INVESTIGATION | Rubiat Mustak and Kazi Mostafijur Rahman |
| 10 | INSTRUMENTAL CHARECTARISATION OF CERAMIC FIBER RAW MATERIAL FOR HEAT INSULATION | T. M. S. A Hossain, M. A Akter, M. A Hakim, M.A Matin and M. F Islam |
| 11 | ENHANCEMENT OF MECHANICAL CHARACTERISTICS OF E-GLASS FIBER REINFORCED EPOXY COMPOSITES WITH FILLER MATERIALS | Shoaib M. Nur, Mahadi H. Parveg, Shibbir Ahmed and Nikhil R. Dhar |
| 12
|
PERFORMANCE ANALYSIS OF PERTURB AND OBSERVE AND INCREMENTAL CONDUCTANCE MPPT ALGORITHMS FOR SOLAR PANEL | Kazi Samira Shamsi Huq, Md Saiful Islam and Md Tazul Islam |
| 13 | A MODEL FOR PRODUCING POWER BY USING THRUST PRODUCED BY THE WIND ON BUSES DURING RUNNING IN HIGHWAYS | Konok C. Bhowmik |
| 14 | INVESTIGATION OF THERMAL HYDRAULIC CHARACTERISTICS IN THE SUB-CHANNEL OF FUEL ASSEMBLY OF SUPER CRITICAL WATER REACTOR (SCWR) | Makit Ahsan Abir, Md. Sadman Anjum Joarder, Chandan Dev Sharma, Altab Hossain and Md Ghulam Zakir |
| 15 | HEAD-ON COLLISION BETWEEN TWO SOLITON VIA TWO-SIDED BETA TIME FRACTIONAL KORTEWEG-DE VRIES EQUATION IN FLUID-FILLED ELASTIC TUBES | S. Akter, M. F. Uddin, M. D. Hossain and Md. Golam Hafez |
| 16 | A BLUETOOTH CONTROLLED ROBOTIC ARM WITH TRAINABLE FEATURE | Aditi Barua, Md. Tazul Islam and Md. Aidid Alam |
| 18 | PARAMETRIC OPTIMIZATION IN POWDER-MIXED ELECTRIC DISCHARGE MACHINING OF TITANIUM ALLOY | Munawar Jawad, Md.Irfan Khan, Sheak Salman and Farah Naz Ahmad |
| 19 | ANALYSIS OF BIODIESEL PRODUCED FROM UTILIZED COOKING OIL AND MAKE A COMPARISON BETWEEN CONVENTIONAL FOSSIL FUEL | Ashfaq Jahan Tanzim, Md. Mehdi Masud Talukder and Asher Inthezam Tahbir |
| 20 | DESIGN OF A BIO-INSPIRED COLLECTOR AND SMART BUCKET FOR AN AUTOMATED PLANT WATERING AND MONITORING SYSTEM | Md. Bayazid Ahmed, Toukir Ahmed Chowdhury and Ahmad Abdullah Mujahid |
| 21 | RISK MODELING AND PRIORITIZATION OF ASSETS FOR CRUDE OIL REFINERIES USING FUZZY RISK BASED MAINTENANCE METHOD | Muhammed Kamrul Islam, S. M. Fahim Faisal and Sajal Chandra Banik |
| 22 | EXPERIMENTAL INVESTIGATION ON THE PERFORMANCE OF LIQUID DESICCANT REGENERATION SYSTEM USING SOLAR WATER HEATER | Gogan Dhar, Md. Tazul Islam, Pramit Ghosh and Jony Nath |
| 23 | MICROALGAE BIO-JET FUEL: REVIEW OF AN EMERGING JET FUEL | Md. Bulbul Ahmed Rubel, Neloy Bhowmik, Md. Abdullah Tajwar and Tamjidul Azam |
| 24 | ASSESSMENT ON PROXIMATE COMPOSITION AND MICROBIAL CHARACTERISTICS OF COMMERCIALLY AVAILABLE MARINE DRY FISHES OF COX’S BAZAR, BANGLADESH | Sagar Talukder, Md. Tazul Islam and Md.Saiful Islam |
| 25 | PROSPECTS AND CHALLENGES OF WASTE TO ENERGY TECHNOLOGIES: A REVIEW | Samina Alam, Anik Paul and Narottam Das |
| 26 | CURRENT STATUS AND DEVELOPMENT STRATEGIES OF USING HIGH TEMPERATURE GAS-COOLED REACTOR TECHNOLOGY IN NUCLEAR POWER PLANTS | Susmita Sarker and Md Ismail Shah |
| 27 | FABRICATION OF A PASSWORD PROTECTED AUTOMATIC LOCKER SYSTEM | Nethun Dutta, Ullash Sen, Anik Paul, Nafis Saad Resan and Arajit Saha |
| 30 | AIRCRAFT DETECTING AND DESTROYING SYSTEM WITH THE HELP OF DESTRUCTIVE LASER AND ULTRASONIC SENSOR | Arajit Saha, Prince Mahmud Hridoy, Pranta Saha, Tarit Barua and Anik Paul |
| 31 | PERFORMANCE ANALYSIS OF IEEE-6 BUS TEST SYSTEM WITH MODIFIED SYSTEM | Deepak Kumar Chowdhury and Nur Mohammad |
| 32 | NUMERICAL ANALYSIS OF CIRCULAR CYLINDER IN TWO DIVERSE SORT OF STRUCTURE OBSTACLES IN TANDEM ARRANGEMENT | Al Mansur Akram, Bably Das, Atanu Das and Tanvir Ahmed |
| 33 | AN EXPERIMENTAL STUDY ON FRONT TOE-IN ANGLES AND ITS AFFECT ON FUEL CONSUMPTION FOR A LIGHT VEHICLE | Riton Kumer Das, Md. Abu Mowazzem Hossain and Md. Tazul Islam |
| 36 | EFFICACIOUS IMAGE PRE-PROCESSING FILTERS FOR BRAIN MR IMAGES | Moshammed Nishat Tasnim, Surovi Aktar Nupur and Moham Ed Abdur Razzaq |
| 37 | A REVIEW ON EFFICIENCY ENHANCEMENT OF CO-FLOW JET AIRFOIL | Ritu P. Roy, Arefin Alam, Debanan Bhadra and Md. Touhidur Rahaman Evan |
| 38 | ELECTRICITY GENERATION FROM THE ROTATIONAL SPEED OF TRAIN WHEEL: AN APPROACH OF FUTURE ENERGY | Md. Sadman Anjum Joarder, Fazlur Rashid, Md Ghulam Zakir and Tanvir Anjum Joarder |
| 41 | CORROSION AND HEAT TRANSFER BEHAVIOUR OF DIFFERENT PROFILE COPPER TUBES UNDER FLOW OF 3.5%NACL SALINE WATER | Alif Muhammad Shafiyee, Maglub Al Nur and Mohammad Salim Kaiser |
| 42 | QUALITY ASSESSMENT IN GRINDING OF COMMON FERROUS ALLOYS UNDER DIFFERENT MACHINING ENVIRONMENTS | Tawshif Rahman, Sheikh Reaz Ahmed and Mohammad Salim Kaiser |
| 43 | REVIEW OF AERODYNAMIC PERFORMANCE OF SHAPE OPTIMIZE AIRFOIL | Md.Mahfujur Rahman, Jahhura Jannat Maiesha and Ukyawsain Marma |
| 44 | REVIEW OF THE SHAPE OPTIMIZATION OF GURNEY FLAP ON AIRFOIL | Afsara Zahin Chowdhury, H.M. Monjur Morshed Bhuiyan, Mahathir Rahman Prantor, Md. Mahbubul Alam and Debanan Bhadra |
| 46 | BOUNDARY LAYER FLOW AND HEAT TRANSFER ANALYSIS OVER A POWER-LAW STRETCHING WEDGE-SHAPED SURFACE WITH THE CORRELATION COEFFICIENT AND MULTIPLE REGRESSIONS | Mohammad Ali and Md Abdul Alim |
| 47 | THEORETICAL INVESTIGATION OF STRUCTURAL, ELECTRONIC, MECHANICAL, AND THERMAL PROPERTIES OF SR DOPED CUBIC CATIO3 | Wasif Abu Dujana and Arpon Podder |
| 48 | MECHANICAL BEHAVIOUR OF CLOSED-CELL CELLULAR COMPOSITE UNDER DROP WEIGHT IMPACTS | Md Ashraful Islam |
| 50 | PERFORMANCE TEST OF A SINGLE BASIN SOLAR STILL WITH MODIFIED ABSORBER PLATE WITH COIL SHAPED FINS | Lailatul Nehar, Md. Tanvir Rahman, Md. Nahid Hossan and Dipak Chandra Roy |
| 51 | IMPACT ANALYSIS OF INCORPORATING A WELL INTO A GAS GATHERING NETWORK | Sheikh Faisal Kader Joy, Md Zayed Bin Sultan, Md. Mehedi Hasan and Nazmul Hasan Emon |
| 52 | DESIGN AND ANALYSIS OF DOMESTIC LPG CYLINDER | Tonmoy Dey, Md Zayed Bin Sultan, Sheikh Faisal Kader Joy and Md Mehedi Hasan |
| 53 | EXPERIMENTAL PERFORMANCE EVALUATION OF A SOLAR STILL WITH FLOATING ALUMINUM FINS | Md. Tanvir Rahman, Lailatul Nehar and Md. Nahid Hossan |
| 54 | EFFECTCS OF COOLING ON EFFICIENCY OF SOLAR PANELS DURING TESTS IN OUTDOOR CONDITIONS | Abdullah Al Rifat, Khan Mahmud Enamul Hasan, Omor Faruk Safwan, Muhammad Mahamood Hasan and A. B. M. Abdul Malek |
| 55 | NUMERICAL INVESTIGATION OF HEAT TRANSFER ENHANCEMENT BY USING TIO2/WATER NANOFLUID IN A TUBE EQUIPPED WITH DIMPLED TWISTED TAPE | Abir Saha, Jamal Uddin Ahamed and Ahmad Abdullah Mujahid |
| 57 | NUMERICAL INVESTIGATION ON THE THERMAL PERFORMANCE OF A TUBE WITH TWISTED TAPES, PERFORATED TWISTED TAPES, RECTANGULAR-CUT PERFORATED TWISTED TAPES AND V-CUT PERFORATED TWISTED TAPES: A COMPARATIVE STUDY | Abir Saha, Jamal Uddin Ahamed, Ahmad Abdullah Mujahid and Muhammad Mostafa Kamal Bhuiya |
| 59 | DESIGN AND FABRICATION OF AN AUTOMATIC BRAKING SYSTEM | Jamil Uddin Murad and Muhammad Mostafa Kamal Bhuiya |
| 60 | NUMERICAL ANALYSIS OF THERMAL PERFORMENCE OF A CIRCULER TUBE HEAT EXCHANGER WITH PAIRS OF RECTANGULER VORTEX GENERATORS | Ibrahim Khalil Apurba, Ahmad Abdullah Mujahid, Md. Bayazid Ahmed and Bodius Salam |
| 61 | PRODUCTION AND CHARACTERIZATION OF THERMOPLASTIC STARCH (TPS) FILM BLENDED WITH MICROPARTICLES AND PLASTICIZED WITH GLYCEROL | Mohammad Nurur Rahman, Md. Muhaiminul Islam Sohan, Md. Ripon Biswas, Raisa Mumtaz and Runa Afroz Rintu |
| 62 | CHARACTERIZATION OF COCONUT COIR REINFORCED COMPOSITE POLYMER TREATED BY KOH | Snigdha Das, Bably Das, Rafid Rizwan Imam, Sherazul Islam Murad and Nazmus Sakib Fahmed |
| 63 | EXPERIMENTAL ANALYSIS OF HEAT TRANSFER ENHANCEMENT IN A CIRCULAR TUBE USING PERFORATED TRIANGULAR WAVY TAPE INSERT | Md. Sherazul Islam Murad, Gogan Dhar, Sheikh Muhammad Humayun Kabir, M. A. Razzaq and Jony Ahmed |
| 64 | CFD ANALYSIS ON EFFECT OF DIVERGENCE ANGLE IN COMPRESSIBLE FLOW OF CONVERGENT DIVERGENT NOZZLE | Ibrahim Khalil Apurba |
| 65 | EXPERIMENTAL STUDY ON PERFORMANCE OF HEAT TRANSFER OF A PERFORATED TWISTED TAPE INSERT FITTED WITH CONICAL RINGS | Md. Sherazul Islam Murad, Jamal Uddin Ahamed, Prasenjit Chakraborty and Snigdha Das |
| 66 | HEAT TRANSFER ENHANCEMENT AND PERFORANCE ANALYSISH BETWEEN ALTERNATE AXIS FLAT BAFFLES TURBULATOR AND PERFORATED BAFFELS TURBULATOR | Md. Sherazul Islam Murad, Jamal Uddin Ahamed, Prasenjit Chakraborty, Shuvo Rahman and Md. Hasibul Hasan |
| 68 | A COVID-19 SYMPTOM SCREENING AND SANITIZATION ROBOT INTEGRATED WITH AUTOMATED SANITIZER DISPENSER, CONTACTLESS TEMPERATURE MEASURING DEVICE & PULSE-RATE SENSOR | Sabrina Safti, Gazi Md. Safi Rayhan and Md. Raihan Islam |
| 69 | INFLUENCE OF VENTURI ON HEAT TRANSFER CHARACTERISTICS OF NANOFLUIDS FLOWING ACROSS PIPE | Shibli Istiak Alam, Sajih Bin Suja and Md. Shariful Islam |
| 70 | DEVELOPMENT AND FABRICATION OF AUTOMATED BIKE STAND RETRIEVAL SYSTEM | Jamal Uddin Ahamed, S.M. Minhazul Islam, Avishek Das and Moin Uddin Ahmed Babar |
| 72 | OPTIMIZED PRODUCTION OF BIODIESEL FROM ARJUN OIL | Dadul Shahriar Sagor and Muhammad Mostafa Kamal Bhuiya |
| 74 | HEAT TRANSFER ENHANCEMENT CHARATERISTICS OF TIO2 NANOFLUID | Prasenjit Chakraborty, Farida Ahmed Koly, Sherazul Islam Murad and Gogan Dhar |
| 75 | DESIGN OPTIMIZATION OF B-SERIES MARINE PROPELLERS | Sm Munawar Mahtab, Md. Iftekharul Alam and Moham Ed Abdur Razzaq |
| 78 | A REVIEW ON TYPES AND PROPERTIES OF ADVANCED COMPOSITE MATERIALS FOR AEROSPACE APPLICATIONS | Wazed Al Islam and Mostafizur Rahman |
| 80 | DESIGN AND FABRICATION OF POLYANILINE BASED SUPERCAPACITOR | Md Mostafizur Rahman, Md. Rayhan Hossen, Iftidul Alam, Md. Shuvo Alam and Mohammed Mastabur Rahman |
| 81 | NUMERICAL ANALYSIS ON MECHANICAL PERFORMANCE OF HEAVY VEHICLE CHASSIS | Apu Debonath, Mostafizur Rahman and Wazed Al Islam |
| 83 | EVALUATION OF THE MAIN BARRIERS OF RMG IN INDUSTRY 4.0 IMPLEMENTATION BY USING ANALYTICAL HIERARCHY PROCESS (AHP) | Sarajit Kumar Mondal, S C Banik and M S Rabbi |
| 85 | EFFECT OF COOLANT PRECOOLING ON AXIAL CORE COOLING OF LITHIUM-ION BATTERY | Shawon Bhattacharjee Shanto and Sirshendu Mondal |
| 86 | FAULT CLASSIFICATION OF DEEP GROOVE BALL BEARING USING MULTI-CLASS SUPPORT VECTOR MACHINE WITH ONE VERSUS ALL APPROACH | Dip Kumar Saha and Md. Emdadul Hoque |
| 88 | A REVIEW ON DIFFERENT DESIGN OPTIMIZATION METHODS OF HEAT EXCHANGERS | Sm Munawar Mahtab, Fatema Tuz Zohra Akhi, Md. Iftekharul Alam, Jamal Uddin Ahamed and Moham Ed Abdur Razzaq |
| 89 | CHARACTERISATION OF MECHANICAL PROPERTIES OF HYBRID COMPOSITE MATERIAL USING GLASS FIBER, NATURAL FIBER & EPOXY RESIN | Rafid Rizwan Imam, Snigdha Das, Moham Ed Abdur Razzaq and Md. Sanaul Rabbi |
| 90 | CFD ANALYSIS ON TURBULENT KINETIC ENERGY DISTRIBUTION OF NACA 0018 AIRFOIL AT TWO LOW REYNOLDS NUMBER | Md. Abdus Shabur, Asif Hasan Khan and Md. Shamim Rayhan |
| 91 | NUMERICAL INVESTIGATION OF NATURAL CONVECTION HEAT TRANSFER USING NANOFLUID OVER TRIANGULAR FINS | Md. Yousuf Sazid, Md. Mahbubur Rahman, Md. Mahmudul Hasan and Sadman Hafiz Durlov |
| 92 | DEVELOPMENT OF A MULTIPURPOSE RESCUE BOT WITH ROCKER-BOGIE & AN ELEVATING MECHANISM | Sadman Hafiz Durlov, Md. Najmus Salehin and Md. Yousuf Sazid |
| 93 | REVIEW OF THE WORKS ON SIZE EFFECT IN MICROFORMING EMPHASIZING ON LAST DECADE (2011-2020) | Tanvir Ahmed Sarker and Md. Sakif Uddin Khan |
| 94 | NUMERICAL AERODYNAMIC PROPERTIES ANALYSIS OF NACA 0015 AIRFOILS WITH DIMPLE AND WITHOUT DIMPLE | Sadman Istaique, Sm Munawar Mahtab, Md Tazul Islam and Arnab Das |
| 95 | OBJECT AVOIDING SELF-BALANCING ROBOT WITH PID CONTROLLER USING ULTRASONIC SENSOR | Abidur Rahman Adib and Mohammad Mizanur Rahman |
| 96 | COMPUTATIONAL SIMULATION OF B737D SUPERCRITICAL WING WITH AND WITHOUT WINGLET AT CRUISING ANGLE | Nurul Ahad Akil, Dr. Md. Sanaul Rabbi and Dr. Md. Mahbubul Alam |
| 97 | REAL-TIME OBJECT MONITORING AND WARNING SYSTEM IN VEHICLE BLIND SPOT REGION | Atikuzzaman Ullash and Prasanjit Das |
| 99 | A 6-DOF POWERED LEAD THROUGH PROGRAMMING BASED ROBOTIC MANIPULATOR TO PERFORM REPETITIVE TASKS | Md. Ahesan Kabir, S. M. Fahim Faisal and Kaji Afzalur Rahman |
| 100 | FABRICATION OF A LOW-COST ROBUST QUADCOPTER FOR SEARCH AND SUPPORT OPERATIONS | S. M. Fahim Faisal and Sajal Chandra Banik |
| 101 | A STUDY OF ALTERNATIVE SOLUTIONS TO HARNESS FLARE GAS IN GAS FIELD AND REFINERY | Nazmun Naher Rita and Nadia Mahjabin |
| 102 | EXPERIMENTAL INVESTIGATION ON PERFORMANCE OF A HYBRID COOLING TOWER | K. M. Arafatul Kabir, Gogan Dhar, Trayee Saha and Bodius Salam |
| 103 | AUTOMATED CAR PARKING SYSTEM | S M Saifullah Arman, Sajal Chandra Banik and Sourav Raxit |
| 104 | NUMERICAL ANALYSIS OF PULSATILE FLOW THROUGH A DOUBLE STENOTIC ARTERY | H.M. Khairul Enam and A.K.M. Sadrul Islam |
| 105 | CONVERSION OF PP AND HDPE PLASTIC WASTE TO FUEL WITH FUNNEL RESERVOIR | Mahbuba Jannat, Sharmin Akter and Dr. Md. Ehsan |
| 107 | DESIGN & FABRICATION OF A SMART AUTOMOTIVE BRAKING SYSTEM | Md. Nazim Uddin, Mohammad Imran Bappy and Samiul Islam Saif |
| 108 | PRODUCTION OF PYROLYTIC OIL FROM POLYETHYLENE TEREPHTHALATE AND PERFORMANCE ANALYSIS IN A DIESEL ENGINE | Md. Raihan Fazal and Asma Ul Hosna |
| 109 | STUDY OF ULTRA LOW-SWIRL BURNER (LSB) FOR NON-PREMIXED METHANE-AIR COMBUSTION USING COMPUTATIONAL ANALYSIS | Md Amzad Hossain |
| 110 | PERFORMANCE EVALUATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM (VARS) OPERATING WITH SOLAR ASSISTED ORGANIC RANKINE CYCLE (ORC) | Abdul Mojid Parvej, Sumaiya Sadika Tuly, Mehadi Hasan Mitul, Asif Elahe, Monjur Mourshed and Md. Rabiul Islam Sarker |
| 111 | STUDY ON PRESENT STATUS OF INDUSTRIAL LEAD ACID BATTERIES IN BANGLADESH. | Md. Tazul Islam, Arafat Rahman and Sadek Mohammad Chowdhury |
| 112
|
EFFECTS OF BORIC ACID CONTENT ON WATER ABSORPTION AND FLEXURAL PROPERTIES OF PERLITE/SODIUM SILICATE COMPOSITES | Pranto Karua and Md. Arifuzzaman |
| 113 | FABRICATION OF ZINC OXIDE/GRAPHENE-CARBON NANOTUBES NANOCOMPOSITE WITH ENHANCED DYE DEGRADATION ABILITY | Intekhab Alam, Md. Minaruzzaman, Md. Ashiqur Rahman and M. A. Basith |
| 114 | THERMOPHORESIS AND BROWNIAN MOTION INFLUENCES ON RADIATIVE WILLIAMSON FLUID FLOW PAST A STRETCHING SURFACE | Sk. Reza-E-Rabbi, Mamunur Roshid and Sarder Firoz Ahmmed |
| 115 | FABRICATION OF ALUMINUM METAL MATRIX COMPOSITES REINFORCED WITH TIO2 BY POWDER METALLURGY TECHNIQUES | Sourav Paul and Mohammad Mahmudul Islam |
| 116 | ANALYSIS OF MECHANICAL PROPERTIES OF JUTE COMPOSITE | M. Habibullah and M. A. Islam |
| 117 | INVESTIGATION OF ALUMINUM CORROSION DUE TO SURFACE AREA IN NEUTRAL AND ACIDIC SOLUTIONS | C. M. A Abtahi, M. A. Islam and M. W. Hridoy |
| 118 | SIMULATION OF DIFFERENT ANODES FOR LITHIUM-ION BATTERY | J. Nath and M. A. Islam |
| 119 | WIND POWERED HYDROGEN PRODUCTION COST IN BANGLADESH: AN ANALYSIS ON OVER 100 METER HIGH BUILDINGS IN CHITTAGONG | Gour Chand Mazumder, S M Nasif Shams, Md. Habibur Rahman and Saiful Huque |
| 120 | ON THE APPLICATION OF AISI 6150 STEEL IN AUTOMOTIVE LEAF SPRING: A COMPUTATIONAL ANALYSIS | Ahmad Abdullah Mujahid, Mahmud Alam Pranto and M S Rabbi |
| 121 | A REVIEW ON RADIONUCLIDES CONCENTRATION IN SOIL AND TRANSFER FACTOR OF RADIONUCLIDES FROM SOIL TO PLANT SPECIES OF WORLDWIDE FEW FOREST AREA. | L. C. Das, M. A. Islam, M. T. Islam, K. A. Rahman and A. Tarafder |
| 124 | EFFECTS OF RADIATION AND CHEMIhttps://drive.google.com/file/d/1NUcJb9Cq-lC61UOWCGuaCynmzUpte-5y/view?usp=sharingCAL REACTION ON MHD BOUNDARY LAYER FLOW OF A MAXWELL FLUID PAST A STRETCHING SHEET WITH NANOPARTICLES | Sarder Firoz Ahmmed, Soheli Sultana Shampa and Sk. Reza-E-Rabbi |
| 125 | AUTOMATIC PROTECTION OF ELECTRICAL AND GAS TRANSMISSION SYSTEM ON EARTHQUAKE DISASTER | Md. Sohanur Rahnam Sohan, Abu Shufian and Md. Mominur Rahman |
| 126 | STUDY OF MINOR LOSS COEFFICIENT & MINOR HEAD LOSSES FOR SUDDEN AND GRADUAL CHANGE IN PIPE DIAMETER | Shaharear Md Emtiaz, Supratim Sarkar Dipta and Md. Quamrul Islam |
| 128 | EXPERIMENTAL AND NUMERICAL INVESTIGATION ON PROPELLER PERFORMANCE IN UNMANNED AERIAL VEHICLES. | Mohammad Abu Taiyab and Md. Tazul Islam |
| 129 | MODIFIED BLOCK REPLACEMENT MAINTAINACE POLICY ON SINGLE PRODUCT MASS PRODUCTION INDUSTRY. | Anupom Barua, Dr. Md. Tazul Islam, Dr. Sajal Chandra Banik and Dr. Md. Sanaul Rabbi |
| 130 | ORIENTATION EFFECT OF JUTE-GLASS FIBER REINFORCED COMPOSITE ON MECHANICAL PROPERTIES | Md. Nasrullah Jahir, Rubiat Mustak, Arup Kumar Debnath and Pronob Deb Nath |
| 131 | BIODIESEL PRODUCTION FROM NON-EDIBLE TUNG (VERNICIA FORDII) SEED OIL | Rahiqul Islam Efaz, Muhammad Mostafa Kamal Bhuiya, Jamil Uddin Murad and Saikat Pal |
| 132 | SIMULATION OF HEAT TRANSFER ENHANCEMENT IN A TUBULAR PIPE USING DIFFERENT RECTANGULAR-CUT TWISTED TAPE INSERTS WITH A TWIST RATIO | Md Moniruzzaman Bhuyan and Ujjwal Kumar Deb |
| 133 | NUMERICAL ANALYSIS OF A POUCH CELL DURING DISCHARGING AT DIFFERENT C-RATE | Aoyon Paul and Md. Arafat Rahman |
| 134 | SIMULATION OF RECHARGEABLE LITHIUM-ION BATTERIES BY USING MATLAB-SIMULINK TO STUDY THE CYCLING BEHAVIOR AT ROOM TEMPERATURE | Towhedul Islam and Md. Arafat Rahman |
| 135 | MEASUREMENT OF BUBBLE SIZE IN CLEAN HOUSEHOLD TAP WATER USING ACOUSTIC TECHNIQUE | Saikat Pal, Dr. Md. Mamunur Roshid, Jony Nath and Rahiqul Islam Efaz |
| 136 | AN ALTERNATIVE REFRIGERATION SYSTEM USING LPG FOR RESIDENTIAL HALLS IN BANGLADESH | Aditya Shekhar Ghosh and Dr. Abu Shadat Muhammad Sayem |
| 138 | NUMERICAL ANALYSIS OF HEAT TRANSFER THROUGH PIN FIN WITHOUT SURFACE MODIFICATION AND WITH SURFACE MODIFICATION | Abdullah Al Mamun, Sm Munawar Mahtab, Sadman Istaique and Md. Mamunur Rashid |
| 139 | NUMERICAL & EXPERIMENTAL EVALUATION OF THE PERFORMANCE OF CELDEK AS A COOLING PAD MATERIAL | Md. Afraim Al Hasan, Md.Golam Kibria and Mohammad U.H. Joardder |
| 140 | EXPERIMENTAL ANALYSIS FOR THE HEAT TRANSFER ENHANCEMENT IN A TUBE BY USING NANOFLUID AND TURBULATOR | Mohammad Nezam Uddin Chy, Jamal Uddin Ahamed, Gogan Dhar and Auvejit Bhowmik |
| 141 | EXPLORATION OF STRUCTURAL AND MAGNETIC PROPERTIES OF NICKEL ZINC FERRITE FABRICATED BY FACILE SOL-GEL METHOD. | Md. Khairul Islam, Shamima Akter Urmi, Sangman Dio and Sha Zubaier Alam |
| 142 | ROAD ACCIDENT ANALYSIS USING MARKOVIAN STOCHASTIC MODEL | Md. Fahim Bin Karim, Sm Munawar Mahtab, Prasanjit Das and Sadman Istaique |
| 143 | DESIGN AND FABRICATION OF A WAVE ENERGY CONVERTOR | Md. Akif Quader, Sm Munawar Mahtab, Sadman Istaique and Sheikh Muhammad Humayun Kabir |
| 144 | DEVELOPMENT AND PERFORMANCE OPTIMIZATION OF BELT PULLEY MECHANISM OIL SKIMMER | Md. Mahmodul Alam, Tariq Jamil, Rayhan Salim Tamzid, D.M. Meftahul Islam and Naseem Ahmed |
| 145 | SIMULATION STUDY FOR INVESTIGATION OF EXTERNAL SHORT CIRCUIT OF RECHARGEABLE LITHIUM-ION BATTERIES BY USING MATLAB-SIMULINK | Hossain Ali and Arafat Rahman |
| 146 | NUMERICAL INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS OF ALUMINIUM AND COPPER HEAT SPREADER | Md. Mahmodul Alam, Rizwanur Rahman, Ahmad Kibria Al Kawsar, Hamza Ahmed, Saif Islam Uday, Samiul Alam and Tasfia Tasnim |
| 147 | A COMPARATIVE REVIEW STUDY ON THE RADIOLOGICAL RISKS DUE TO TOBACCO CULTIVATION AND PRODUCTION OF TOBACCO-BASED PRODUCTS IN BANGLADESH | Kazi Anisur Rahman, Mohammed Ainul Islam and Mohammed Tazul Islam |
| 148 | A REVIEW STUDY OF THE SAFETY ISSUE FOR WORKERS OF LPG BOTTLING PLANT DUE TO RADIATION FROM LPG | Mohammed Ainul Islam, Sajal Chandra Banik, Kazi Anisur Rahman and Mohammed Tazul Islam |
| 149 | SCALABLE SYNTHESIS OF NANOSTRUCTURED SILICON FROM SAND | Luke Topu Mondol, Safina-E-Tahura Siddiqui and Dr. Md. Arafat Rahman |
| 150 | NUMERICAL INVESTIGATION OF PAST SIX IDENTICAL SQUARE CYLINDERS 2×3 ARRANGEMENT AT LOW REYNOLDS NUMBER | Alvi Ahmmed, Towhidur Rahman Nasim, M.A Shadab Siddiqui and Prasanjit Das |
| 151 | 4DOF ROBOTIC ARM FOR WORKING ON THREE DIMENSIONAL WORKSPACE BASED ON INVERSE KINEMATICS | Radheshyam Nath Jisu, Jamal Uddin Ahamed and Utsha Barua |
| 152 | CHANGE OF HARDNESS IN STEEL BARS DUE TO CORROSION IN PORE SOLUTIONS | U. Barua, M. A. Islam and R. N. Jisu |
| 153 | NUMERICAL INVESTIGATION OF STRESS DEVELOPMENT IN MODIFIED TOOTH POLYMER GEAR WITH FIBER REINFORCEMENT | Tariqul Islam, Mohammad Shahrear Bin Zaman, Md. Mahfuzul Hoque Mehedi, Md. Rasel Ahmed and Md. Emdadul Hoque |
| 154 | NUMERICAL INVESTIGATION ON MODIFIED NACA 2412 AEROFOIL WITH SINUSOIDAL LEADING EDGE AND THE EFFECT OF ITS AMPLITUDE AND WAVELENGTH | Tariqul Islam, Md. Mahfuzul Hoque Mehedi, Mohammad Shahrear Bin Zaman, Md. Rasel Ahmed and Md. Emdadul Hoque |
| 155 | NUMERICAL INVESTIGATION ON EFFECT OF DIMPLE POSITION ON SYMMETRIC AEROFOIL AT HIGHER ANGLE OF ATTACK | Tariqul Islam, Md. Rasel Ahmed, Md. Mahfuzul Hoque Mehedi and Md. Emdadul Hoque |
| 156 | NUMERICAL INVESTIGATION OF DROPLET IMPACT ON LIQUID POOL UNDER DC ELECTRIC FIELD USING OPENFOAM | Shaharear Md Emtiaz, Anik Sarker and Ashmita Roy Medha |
| 157 | ANALYSIS OF MECHANICAL PROPERTIES OF HYBRID COMPOSITE OF GLASS FIBER, BASALT DUST & RICE BRAN | M. H. Hasan and M. A. Islam |
| 158 | DEVELOPMENT AND PERFORMANCE OPTIMIZATION OF VERTICAL AXIS WIND TURBINE USING AVP | Md. Mahmodul Alam, Irfan Ahmed, Md. Golam Rasul Joy, Maksud Kamal, Md. Tahmid Anim, Tanjila Islam, Iftekhar Amin and Samiul Alam |
| 159 | PERFORMANCE INVESTIGATION OF SUBMERSIBLE PUMPING SYSTEM USING MECHANICAL DEVICES IN DIFFERENT BORE WELL | Md. Sanowar Hossain, Mohammad Rofiqul Islam, Md. Hasibul Hasan Himel, Md. Sabit Hasan, Tamal Krishna Roy and Noor Imani Mallik |
| 160 | A STUDY ON THE TENSILE PROPERTIES FROM THE COMPOSITION OF AN ANNEALED STRUCTURAL STEEL SAMPLE | Dipta Sarkar, Fahim Khan and Razia Khan Sharme |
| 161 | FABRICATION AND CHARACTERISATION OF MECHANICAL PROPERTIES OF HYBRID COMPOSITE MATERIAL USING WOOD DUST, GLASS FIBER AND EPOXY RESIN | Md. Jafor Ahammad, Md. Abu Mowazzem Hossain and Asif Al Ziyan |
| 162 | DESIGN AND FABRICATION OF AN ELECTROMAGNETIC BRAKING SYSTEM | Avishek Chowdhury, Md. Mizanur Rahman, Redoy Masum Meraz and Tafsirul Hassan |
| 163 | EVALUATION OF K-Ω SST MODEL AT HIGH REYNOLDS NUMBER FOR THE FLOW OVER A SYMMETRIC AIRFOIL | Tafsirul Hassan, Md. Tazul Islam, Md. Mizanur Rahman and Abu Raihan Ibna Ali |
| 164 | A STUDY ON FORECASTING THE IMPACTS OF MAJOR FAULTS IN AN UNDERGROUND COAL MINE: KHALASHPIR COAL BASIN PERSPECTIVE | Habibullah Sarker, Quamruzzaman Chowdhury and Md Mostafijul Karim |
| 165 | A REVIEW ON EXISTING CONDITIONS, ENVIRONMENTAL IMPLICATIONS AND POSSIBLE ALTERNATIVES FOR THE BRICK KILN IN BANGLADESH | Chemon Humayra Tasnima, Bably Das and Abu Shadat Muhammad Sayem |
| 166 | NUMERICAL ANALYSIS OF PERFORMANCE OF A DOUBLE PIPE HEAT EXCHANGER | M. Mamun and M. A. Islam |
| 167 | HEAT AND MASS TRANSFER MODEL OF DUAL POROUS SAMPLES DURING CONVECTIVE DRYING | Md. Bakhtierkhalzi, A.M. Parvej and Mohammad U.H. Joardder |
| 169 | INVESTIGATION AND PERFORMANCE ANALYSIS OF A SMALL SCALE SAVONIUS WATER CURRENT TURBINE IN PERSPECTIVE OF BANGLADESH | S. M. Mohaiminul Islam, Md. Tazul Islam, Mohammad Abid Hossain, Alvi Ahmmed, Md. Main Uddin Sagar and Protap Sarker |
| 170 | A STUDY ON THE CAUSES OF WATER LOGGING SCENARIO AND MECHANISED DRAINAGE SYSTEM IN THE PORT CITY CHITTAGONG | Chemon Humayra Tasnima, Abu Shadat Muhammad Sayem and Bably Das |
| 171 | ANALYSIS OF WATER CONSUMPTION IN POWER SECTOR OF BANGLADESH AND OPERATIONAL SHADOW PRICE FOR FUTUTRE CONSIDERATION | Abu Shadat Muhammad Sayem |
| 172 | EXPERIMENTAL INVESTIGATION OF CRYSTALLISATION SCALE FORMATION BEHAVIOUR ON DIFFERENT HEAT EXCHANGER SURFACE | Prasanjit Das |
